Best cup stack for a 7.5 inch B tube?

Discussion on building a legal form 1 suppressor
Pepe
Posts: 8
Joined: 08 Jan 2017 23:00
Location: Here

Best cup stack for a 7.5 inch B tube?

Postby Pepe » 08 Jan 2017 23:30

Hey guys.

I really don't know much about cans.
But I'm building a can for a 9mm P226 and it will hopefully work on my Sub-2000 9mm carbine as well.

I already got the dies, and the booster. Awaiting my order for SDTA and form 1.

What's the best way to stack my cups?

I was going to stack them all without any spacers And the smallest possible blast chamber. And if I get any blow back, I can always drill some weeping holes in the first few baffles.

What do you think? This makes sense to you?

Pepe
Posts: 8
Joined: 08 Jan 2017 23:00
Location: Here

Re: Best cup stack for a 7.5 inch B tube?

Postby Pepe » 11 Jan 2017 21:21

Hmmmm. .......this appears to be a dead forum with not a lot of action going on. No replies at all?

mid-ga-beekeeper
Posts: 1
Joined: 24 Jan 2017 17:34
Location: usa

Re: Best cup stack for a 7.5 inch B tube?

Postby mid-ga-beekeeper » 24 Jan 2017 17:49

you need to have a good size blast chamber to catch the first pressure coming out. then stack away the rest. the larger the blastchamber the better the reduction.plus i like wet suppressors. drops level by 10-20 decibels.

User avatar
Gunfighter2a
Posts: 30
Joined: 04 Jun 2016 06:23
Location: North Georgia

Re: Best cup stack for a 7.5 inch B tube?

Postby Gunfighter2a » 25 Jan 2017 05:08

I would go with a DTube by the time you drill for a 9mm there will not be much baffle left and when you say cups do you mean formed freeze plugs or cones you should look at the form one suppressor forum those guys are doing some cool stuff with pistol caliber cans


Return to “Form 1 Suppressors”

Who is online

Users browsing this forum: No registered users and 0 guests